BZ-350 gearbox with helical gear

Following its commitment of continuous improvement, Bezares has developed a new version of the BZ-350 transferbox with helical gear. 

This feature significantly reduces the noise level and improves its performance and durability, which combined with its mechanical or pneumatic actuator options, make the BZ-350 box one of the most flexible options in our range. 

Auxiliary power take-offs require the input gear # 17 to connect to the central unit. 

For more information, contact our commercial department with the 6015899 code for mechanical actuator or 6015999 for pneumatic actuator.

NEW MBM multifunction oil tanks

We are proud to introduce a new version of our well known aluminum tank MB series. This new model is supplied without return ports in the sides, which improves the mounting options in those chassis where the space is very limited. However, general dimensions are the same as the previous MB model while the total weight is slightly reduced.
It includes filter flange, rear drain port and fill cap with level rod (front level indicator has been eliminated). Optionally, it can be supplied with a standard return filter or a low profile filter kit to avoid interference with other vehicle components.

They are already available in 160 and 200 liters, under the part numbers 90AS16MBM and 90AS20MBM.

For more information, you may contact our Commercial Department.

AVAILABLE NOW – New TraXon Double Output PTO


The first units of our new reinforced power take-off are now available for sale. With internal lubrication and mounting flange incorporated in the housing, this setup has the advantage of easier gearbox mounting by reducing the number of elements to be assembled.

Its two outputs, with equal ratios of 1:1.6, can be combined between ISO 4 holes and transmission flange, as well as being used independently when driven separately.

The new power take-off for ZF TraXon is available under the part number 1029950

For more information, you may contact our commercial department.

ISO/TS 16949 – Automotive quality certification

ISO/TS 16949 – Automotive quality certification

Bezares is proud to announce the achievement of the Certification ISO / TS 16949.
ISO / TS 16949 is a technical specification based on ISO 9001 that defines the requirements of the quality system for the automotive industry’s supply chain.

 ISO/TS 16949:2009 aims for the development of a quality management system that provides for continual improvement, emphasizing defect prevention and the reduction of variation and waste in the automotive supply chain. ISO/TS 16949 applies to the design and development, production and, where relevant, the installation and servicing of automotive-related products. 

ISO / TS 16949 represents a significant opportunity for the standardization and continuous improvement of Bezares products, certifying the quality of our products and production processes.

Bezares @ Nissan Body Builder’s Guide


Bezares has been recently included in Nissan Body Builder’s Guide 2017 for the gearbox ZF 6S-420. 

We are certified once again as official supplier as in previous editions for the gearboxes M5-35 and M5-40.

Apart from ensuring the quality of our processes and products, this certification of Nissan guarantees the complete compatibility of our products with the lifespan expected from original parts. 

It also allows BZ products to be factory-installed or repaired by authorized Nissan dealers as an original part.

Bezares will continue to invest in new partnerships and certifications in a continuous improvement process to guarantee the quality and compatibility of its products with the main gearbox manufacturers.