3300 – lubricated (Wet Spline) SAE B output shaft for Allison

3300 – lubricated (Wet Spline) SAE B output shaft for Allison



Bezares keep Developing Solutions for our Allison PTOs, as this new lubricated output shaft SAE B version for our 3300 PTO.

The new ‘Wet Spline’ Option has the advantage of providing more wear protection on the output shaft for factors such as friction or vibration.
This through a new oil dipping flange into the splined shaft to the output of the PTO, thus extending the life of the PTO and hydraulic pump.

Especially suitable for Heavy Duty Applications Requiring Many drives or vehicles equipped with powerful and ligh engines, being able to transmit more torque to the gearbox and therefore to the PTO.

For more information, you may contact our sales department.

New BULL Winch for Pick-up Vehicles

In the following months BZ will launch a new hydraulic winch for applications with reduced mounting space and with a maximum rope capacity of 15 m. Some example applications would be pick-up vehicles, winches mounted under the platform or on the second floor or auxiliary winches.

This new winch is a reduced and lighter version (less than 30 kg) of our actual Bull. Currently under development, it is expected to be finished in the last quarter of the year.

The Bull Pick-up will be available in two differente models: 3500 kg and 4500 kg.
Regarding the shifting options, it could be ordered:

  • With manual clutch
  • With pneumatic clutch
  • With clutch activated by cable
  • Without clutch (for the situations with no direct access to the winch, saving space in the installation).

BZ-350 gearbox with helical gear

Following its commitment of continuous improvement, Bezares has developed a new version of the BZ-350 transferbox with helical gear. 

This feature significantly reduces the noise level and improves its performance and durability, which combined with its mechanical or pneumatic actuator options, make the BZ-350 box one of the most flexible options in our range. 

Auxiliary power take-offs require the input gear # 17 to connect to the central unit. 

For more information, contact our commercial department with the 6015899 code for mechanical actuator or 6015999 for pneumatic actuator.

NEW MBM multifunction oil tanks

We are proud to introduce a new version of our well known aluminum tank MB series. This new model is supplied without return ports in the sides, which improves the mounting options in those chassis where the space is very limited. However, general dimensions are the same as the previous MB model while the total weight is slightly reduced.
It includes filter flange, rear drain port and fill cap with level rod (front level indicator has been eliminated). Optionally, it can be supplied with a standard return filter or a low profile filter kit to avoid interference with other vehicle components.

They are already available in 160 and 200 liters, under the part numbers 90AS16MBM and 90AS20MBM.

For more information, you may contact our Commercial Department.

AVAILABLE NOW – New TraXon Double Output PTO


The first units of our new reinforced power take-off are now available for sale. With internal lubrication and mounting flange incorporated in the housing, this setup has the advantage of easier gearbox mounting by reducing the number of elements to be assembled.

Its two outputs, with equal ratios of 1:1.6, can be combined between ISO 4 holes and transmission flange, as well as being used independently when driven separately.

The new power take-off for ZF TraXon is available under the part number 1029950

For more information, you may contact our commercial department.