New TraXon double output PTO


New reinforced power take-off with internal lubrication and mounting flange incorporated in the housing. This setup has the advantage of easier gearbox mounting by reducing the number of elements to be assembled.

Its two outputs, with equal ratios of 1:1.6, can be combined between ISO 4 holes and transmission flange, as well as being used independently when driven separately.

The new power take-off for ZF TraXon will be available at the end of the first quarter of 2017 under the part number 1029950
For more information, contact our commercial department.

NEW – Thru drive T6ECR vane pump


Bezares is proud to introduce the new double flow pump T6ECR with thru drive shaft, which allows to be mounted in tandem with another unit.


This feature allow an easier system installation in confined spaces and by requiring less number of elements to install (motors, couplings, etc.), a reduction in the associated costs.


Already available with SAE A coupling flange, shaft No. 3 and multiple flow rates:

  • First cartridge: between 132 and 270 liters @ 1000 rpm. (42 ÷ 85 Gal. @ 1200 rpm)
  • Second cartridge: between 11 and 100 liters @ 1000 rpm. (3 ÷ 31 Gal. @ 1200 rpm)


The ports positions are fully configurable.

For more information, please consult our commercial apartment. 

NEW BZ Transferbox

Extending the Bezares transfer boxes’ application range, we introduce our new double-acting pneumatic piston version of our well known 1:1.21 Transfer Box.

This new system ensures the correct position of the pneumatic piston, reducing the risk of damages in the case of an accidental pressure loss in the circuit.

The same number of mounting possibilities are offered as in previous models


The new 1:1.21 transfer box has two auxiliary outputs that can be combined in 3 different configurations: two pumps, two flanges or pump and flange. These auxiliary outputs can be mounted to the right side or to the left side of the vehicle, according to the customer’s needs.

This new version comes in addition to the other two types of central unit’s actuators (mechanical and single effect pneumatic) and, optionally, is offered with horizontal assembly support.
For more information, contact our commercial department. 

New 30 liters plastic tanks for side mounting

We proudly present our new 30 liters oiltanks for side mounting.

Manufactured in high density linear polyethylene with UV protection, which provides high durability and low weight. They are also equipped with oil filter, filler cap and level with thermometer.

With a more modern design, this new reservoir will soon replace the deposits with part number 90PS03T, renewing our side tanks in polyethylene line.

The new deposits are already available under the code XXXXXX

For more information contact our sales department

FR-60 – now with Ø2″ suction fitting

FR-60 – now with Ø2″ suction fitting

The FR 60 pumps will include a suction fitting for Ø2″ pipe instead of the current Ø1 1/2″ pipe which will still be available on demand.

The Ø2″ suction fitting reduces the fluid’s speed and ensures proper pump feeding for any application, guaranteeing the pump’s optimal output.

This fitting is pre-installed on all FR-60 pumps manufactured from January 2017. If you prefer, you can also order this fitting separately with the code 9035016.

For more information, please contact our commercial department.